RM5000-6 RPS57E Pressure Pump & RM1600-2 300mm Cover

The RainPro RM5000-6 system with RM1600-2 valve is designed for speed of installation – no cables, no float, no solenoid, no electronic controls. The simplicity of this system has the added benefit of making it very affordable. The RM5000-6 stops flow of mains supply while rain water is being pumped to help conserve water. This system is suited for applications supplying laundry and toilets, and is also suitable for cabins or small houses with one bathroom. For larger whole house supply, we recommend to use the RM1500-2. Includes a 315mm valve enclosure for mounting to the top of the tank.

Domestic toilet & laundry
Small house / cabin granny flat (1 bathroom)
Small commercial / industrial*
Garden irrigation*
Toilet blocks (up to 6 fixtures)*
Construction / mine site offices*

Rains to Mains switch over system allows mains water to flow if tank water is unavailable, and restricts mains flow if tank water is sufficient
Valveset is 100% hydraulic – no electronics
Watermark certified, includes dual check valve on mains
Reliable, efficient power-saving performance
Automatic pressure controller giving consistent pressure supply
Run dry protection and thermal overload protection for the pump
Internal blockage detection system, which shuts down the pump if debris obstructs the internal check valve
Compact design, water-cooled motor
Certified to AS/NZS4020 for use with potable water

RM SYSTEM

Rain Mains Valve included in 315mm enclosure
Hole for top of tank 290mm
Includes two ball valves
Pre-assembled

REEFE RAINPRO RM4000-5 RAINS TO MAINS with PRJ65 Pump and RM1500-2 Valve (ccrrm4000-5)

The RainPro® RM4000-5 with RM1500-2 valve is a 25mm system with no pressure loss on the Mains supply, and is designed for speed of installation – The Rain Mains device has no cables, no float, no solenoid, no electronic controls. The simplicity of this system has the added benefit of making it very affordable. The RM4000-5 stops flow of mains supply while rain water is being pumped to help conserve water. Refer to the table below to choose the pump sizing according to the house size and number of bathrooms. This system is not recommended for suction lift, use the RM5000-4 submersible version for underground tanks.

Rains to Mains change over system allows mains water to flow if tank water is unavailable, and restricts mains flow if tank water is sufficient
Mains flow up to 100L/Min
Valveset is 100% hydraulic – no electronics
Watermark certified, includes dual check valve on mains
Reliable, efficient power-saving performance
Automatic pressure controller giving consistent pressure supply, automatically checks for water every 24 hours after a run dry event
Run dry protection and thermal overload protection for the pump
Certified to AS/NZS4020 for potable water

High quality European Made pressure pump
Supplied with RM1500-2 Changeover valve
Stainless-steel casing and shaft
Carbon/ceramic mechanical seal for reliability
Quick plug pressure controller connection
Ingress Protection IP44
Insulation Class F

Bathrooms & Laundry
Whole house – refer to the table below for sizing
Commercial / industrial
Garden irrigation*
Toilet blocks (up to 12 fixtures)*
Construction / mine site offices*

REEFE RAINPRO RM4000-5 RAINS TO MAINS WITH PRJ055 PRESSURE PUMP AND RM1500-2 valve

The RainPro® RM4000-5 with RM1500-2 valve is a 25mm system with no pressure loss on the Mains supply, and is designed for speed of installation – The Rain Mains device has no cables, no float, no solenoid, no electronic controls. The simplicity of this system has the added benefit of making it very affordable. The RM4000-5 stops flow of mains supply while rain water is being pumped to help conserve water. Refer to the table below to choose the pump sizing according to the house size and number of bathrooms. This system is not recommended for suction lift, use the RM5000-4 submersible version for underground tanks.

Rains to Mains change over system allows mains water to flow if tank water is unavailable, and restricts mains flow if tank water is sufficient
Mains flow up to 100L/Min
Valveset is 100% hydraulic – no electronics
Watermark certified, includes dual check valve on mains
Reliable, efficient power-saving performance
Automatic pressure controller giving consistent pressure supply, automatically checks for water every 24 hours after a run dry event
Run dry protection and thermal overload protection for the pump
Certified to AS/NZS4020 for potable water

High quality European Made pressure pump
Supplied with RM1500-2 Changeover valve
Stainless-steel casing and shaft
Carbon/ceramic mechanical seal for reliability
Quick plug pressure controller connection
Ingress Protection IP44
Insulation Class F

REEFE RM5000-4 RPS34E rains to mins system with submersible pump and RM1600-2 Valve (ccrrm5000-4rm1600 )

The RM5000-4 features a Submersible Multistage Pressure Pump with integral controller, specifically designed for fast and easy installation. The pumping valve are made in Europe, guaranteeing exceptional quality and performance in Rainwater supply applications. This system is suitable for underground tanks and best suited for supply to toilets, laundries and small house or cabin with one bathroom.

Bathrooms & Laundry
Whole house – refer to the data table below for sizing
Small commercial / industrial*
Garden irrigation*
Toilet blocks (up to 6 fixtures)*
Construction / mine site offices*

Stainless Steel AISI 304 Pump body, motor shaft, handle, cover, screen
Polymer Impellers, diffusers
Alumina.Graphite, lubricated mechanical seal
Valveset made from DZR Brass

REEFE RAINPRO RM1500-2 Floatless Rain to Mains change over Valve (ccrrm1500-2)

The RM1500-2 is an automatic hydraulically operated mains to rainwater changeover valve. It is ideal for rainwater harvesting – switches from mains to tanks whenever tank water is being pumped and automatically defaults to mains in the event of a power or pump failure. This unique valve comes with dual 1″ outlets, giving the user flexibilty in both domestic and commercial applications. This product must be used with pumps with an auto restart pressure controller.

Whole house supply up to 6 bathrooms*
Toilet blocks*
Garden irrigation*
Ablutions blocks*
Hotels & motels*
Factories & warehouses*
Units & complexes*
Council parks irrigation*

Simple and easy to install
Full flow 25mm/1″ outlets
Minimal pressure reduction
No regular maintenance required
Suitable for external and submersible pressure pumps
No float required on auto restart pumps
Can be mounted directly onto external pumps
Certified dual check valve for back flow prevention
Maximum water temperature 40°C
Dual outlets (use one or both)
Wall Mounting Bracket available separately (Code 20333)

Nickel plated DZR brass components
No electrical components – 100% hydraulically operated

** IMPORTANT NOTE: If the mains pressure is 400kPa above the normal operating pressure of the pump, the device will not completely isolate the mains. A pressure reduction valve will need to be fitted to reduce the mains pressure.