Showing 91–108 of 293 resultsSorted by price: low to high
25mm Ball Valve M/F Poly High-Grade
In stock
$50.00The 25mm Poly Ball Valve M/F is a high-quality, manual flow control solution designed to act as an on/off switch for your water or liquid tank system. By utilising a rotating internal ball, our poly ball valve allows you to open or close off flow. Featuring a secure shut-off with a simple quarter-turn of the handle, it serves as a vital connection point for isolating sections of your pipework and tank.
Sturdy Construction & Material
Engineered for durability, this ball valve is manufactured from high-grade, impact-resistant polypropylene (poly). This design is engineered to be lightweight for easy handline during installation, yet robust enough to withstand the demands of consistent outdoor use. The black body of the ball valve provides natural UV resistance, ensuring the fitting remains corrosion-free, and remains tough when exposed to the harsh Australian sun.
Reliable Sealing & Performance
To guarantee a bubble-tight seal, this 25mm ball valve features premium EPDM O-rings and Teflon seats. These high-spec components ensures a smooth manual operation, and dependable sealing for the long term. Every ball valve unit undergoes underwater air-pressure testing to ensure a leak-free performance before it arrives to your site.
water filter 20” X 4.5″ 5 Micron poly spun dirt and sediment replacement filters
In stock
$53.00QUICK OVER VIEW
- High Performance pre sediment filter
- High Performance Filtration (HPF) spun polypropylene sediment cartridge
- Gradient depth design with multi-layer filtration (20micron 10 micron 5 micron )
- Effectively removes fine dirt, rust, sand, and suspended particles
- High dirt-holding capacity with low pressure drop performance
- HPF Polypropylene Spun Sediment Filter is a high-efficiency cartridge designed for fine sediment reduction in residential, commercial, and industrial water systems. Made from 100% food-grade polypropylene, this cartridge features a gradient depth construction that progressively captures particles throughout the filter body.Larger particles are trapped in the outer layers, while finer contaminants are retained closer to the dense inner core. With a final filtration layer of 5 micron, this cartridge delivers superior clarity by removing very fine sediment, rust, and suspended solids. The design maximises dirt-holding capacity while maintaining low pressure drop, ensuring both long service life and consistent flow performance.Ideal for use with both mains and rainwater supplies, the HPF polypropylene spun filter is a cost-effective solution for protecting downstream carbon filters, membranes, and water-using equipment from premature fouling. Designed to fit standard 20″ x 4.5″ housings, it offers reliable performance across a wide range of sediment reduction applications.
water filters 10” x 2.5” 0.5 chloramine reduction coconut carbon block replacement filters
In stock
$54.00QUICK OVER VIEW
- Made from 100% Coconut Carbon – Catalytic Highly Reactive
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Effectively Neutralises Chloramine & Absorbs VOC’s and DBP’s in Mains Water
- Chloramines and Chlorine reduction coconut carbon block water filter. The outer screen will reduce dirt sediment and algae. Under the screen is a 0.5 sub micron coconut carbon block filter The filters will fit most standard 10″x2.5” filter housings and can be used as a single stage filter if you have a clean water supply or use as a second stage filter in a twin filter system.
0.5 micron chloramine reduction coconut carbon block replacmnet filters
water filter 0.5 Micron Nominal Washable Ceramic Carbon Water Filter Cartridge | 10″ x 2.5″
Out of stock
$55.00Size: 10″ x 2.5″ will fit 10″ x 2.5″ filter housings
Type: Ceramic
Rating: 0.5 Micron Nominal
Performance Specs
particulate Reduction: Class 1
Turbidity Reduction: >99.69%
Flow Rate: 1.05 GPM (us gallons @ 45 PSI)
Flow Rate: 3.92 LPM (litres @ 3 bar)
water filter 20″ X 4.5″ 5 Micron Pleated dirt and sediment replacement filters
In stock
$58.00QUICK OVER VIEW
he PL4510-05 Pleated Washable Sediment Filter offers high-performance filtration with the following benefits:
- 5 Micron Filtration: Captures fine sediment, rust, and dirt down to 5 micron for improved water clarity.
- 10″ x 4.5″ Size: Compatible with most 10” x 4.5” housings, providing high flow rates and low pressure drop.
- WaterMark Certified: Independently certified for compliance with Australian standards for water filtration components.
- NSF/ANSI 42 Compliant: Meets international standards for material safety and structural integrity.
- Washable & Reusable: Designed for heavy sediment loading; can be washed and reused, reducing replacement frequency and maintenance costs.
- High Dirt-Holding Capacity: Pleated design offers extended filter life and greater sediment capture.
- High Flow/Low Pressure Drop: Engineered to maintain strong water pressure while effectively filtering particulates
water filter 20” X 4.5 ”5M Coconut carbon block filter , chlorine , taste , odour , carbon block
In stock
$60.00Quick Overview
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- 5 Micron Rating
- Over 95% Reduction of VOC’s
- Compliant to NSF/ANSI 42
40mm Brass Male Threaded Flange tank outlet
In stock
$60.00Brass tank outlet suitable for installation on smooth wall poly water tanks.
Provides 40mm (1.5″) Male BSP and 32mm (1.25″) Female BSP threaded connection. Ball valves are available separately if required.
Solid brass construction for a heavy duty and reliable fitting, with EPDM washer. Watermark approved, and tested and certified to AS 3688.
Back nut has a reverse (left hand) thread to help prevent the fitting coming loose when connecting valves and/or pipework to the fitting.
Important: ensure there is sufficient smooth, flat surface area surrounding the fitting location, to enable the flanges of the tank fitting to rest flat against the tank wall – both on the inside and the outside. Placing the fitting too close to a rib, curve or similar feature in the tank wall will cause the fitting to leak. Overall flange diameter provided in the diagrams above.
Recommended hole saw size: 50-51mm
Poly Flanged Outlet 40mm F thread tank outlet
In stock
$60.00This Poly Flanged Outlet is a reliable, high-quality tank outlet designed to provide a secure and leak-proof connection through the wall of your poly rainwater tank. Featuring a 40mm female thread, this flanged fitting serves as a sturdy connection point, making it straightforward to attach poly ball valves or pipework to your water storage system.
Sturdy Construction & Material
Built for long-term performance, this 40mm Poly Flanged Outlet is made from high-grade, impact-resistant polypropylene. The lightweight yet durable design ensures the fitting is easy to handle during installation while remaining strong enough to handle consistent use. The black body of the fitting provides natural UV resistance, helping it withstand the elements in outdoor environments without corroding or degrading over time.
Reliable Sealing & Performance
To ensure a watertight seal, this Poly Outlet utilises premium sealing components, including EPDM O-rings and Teflon seats. These high-grade materials allow for smooth operation and dependable sealing, giving you peace of mind that your setup is secure. Additionally, every unit is air-pressure tested under water by the manufacturer to confirm leak-free performance and field-proven reliability before it reaches you.
Versatile Applications
The corrosion-free poly material is designed for consistent performance in a variety of settings. While perfect for standard rainwater harvesting, these fittings are also suitable for a versatile range of liquids used in both agricultural and industrial applications. Whether it’s for the garden or out in the paddock, the 40mm Poly Outlet is built to remain reliable in rugged conditions.
Installation & Plumbing Compatibility
This fitting has been designed with modern plumbing in mind. The 50mm thread alignment matches the most common downstream poly pipework used by installers today. This ensures that connecting to your existing plumbing or new pipework is a seamless and efficient process. For long-term maintenance, repair kits are also available should you ever need to refresh specific components.
water filter 10″ X 4.5″ 5 micron Pleated dirt and sediment replacement filters
In stock
$62.00QUICK OVER VIEW
He PL4510-05 Pleated Washable Sediment Filter offers high-performance filtration with the following benefits:
-
- 5 Micron Filtration: Captures fine sediment, rust, and dirt down to 5 micron for improved water clarity.
- 10″ x 4.5″ Size: Compatible with most 10” x 4.5” housings, providing high flow rates and low pressure drop.
- WaterMark Certified: Independently certified for compliance with Australian standards for water filtration components.
- NSF/ANSI 42 Compliant: Meets international standards for material safety and structural integrity.
- Washable & Reusable: Designed for heavy sediment loading; can be washed and reused, reducing replacement frequency and maintenance costs.
- High Dirt-Holding Capacity: Pleated design offers extended filter life and greater sediment capture.
- High Flow/Low Pressure Drop: Engineered to maintain strong water pressure while effectively filtering particulates
water filters 10” X 4.5” Low pressure drop carbon block replacemnet filter = low restriction
In stock
$65.00QUICK OVER VIEW
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- Micron Rating 20M
- High Flow – Low Pressure Drop
- Over 95% Reduction of VOC’s
- The coarser micron rating of 20uM allows the filter cartridge to process a higher volume of water with as little resistance as possible. The success of this cartridge comes by way of the special combination of materials and high iodine number to provide chemical absorption you would expect from a standard CTO cartridge, while at the same time having almost 30% less media creating a thinner block wall, allowing water to flow at a higher rate with little resistance.
- Compliant to NSF/ANSI 42
40mm Ball Valve M/F Poly High-Grade
In stock
$65.00The 40mm Poly Ball Valve M/F is a high-quality, manual flow control solution designed to act as an on/off switch for your water or liquid tank system. By utilising a rotating internal ball, our poly ball valve allows you to open or close off flow. Featuring a secure shut-off with a simple quarter-turn of the handle, it serves as a vital connection point for isolating sections of your pipework and tank.
Sturdy Construction & Material
Engineered for durability, this ball valve is manufactured from high-grade, impact-resistant polypropylene (poly). This design is engineered to be lightweight for easy handline during installation, yet robust enough to withstand the demands of consistent outdoor use. The black body of the ball valve provides natural UV resistance, ensuring the fitting remains corrosion-free, and remains tough when exposed to the harsh Australian sun.
Reliable Sealing & Performance
To guarantee a bubble-tight seal, this 25mm ball valve features premium EPDM O-rings and Teflon seats. These high-spec components ensures a smooth manual operation, and dependable sealing for the long term. Every ball valve unit undergoes underwater air-pressure testing to ensure a leak-free performance before it arrives to your site.
50mm Brass Male Threaded Flange tank outlet
In stock
$72.00Brass tank outlet suitable for installation on smooth wall poly water tanks.
Provides 40mm (1.5″) Male BSP and 32mm (1.25″) Female BSP threaded connection. Ball valves are available separately if required.
Solid brass construction for a heavy duty and reliable fitting, with EPDM washer. Watermark approved, and tested and certified to AS 3688.
Back nut has a reverse (left hand) thread to help prevent the fitting coming loose when connecting valves and/or pipework to the fitting.
Important: ensure there is sufficient smooth, flat surface area surrounding the fitting location, to enable the flanges of the tank fitting to rest flat against the tank wall – both on the inside and the outside. Placing the fitting too close to a rib, curve or similar feature in the tank wall will cause the fitting to leak. Overall flange diameter provided in the diagrams above.
Recommended hole saw size: 50-51mm
Poly Flanged Outlet 50mm F thread tank outlet
In stock
$72.00This Poly Flanged Outlet is a reliable, high-quality tank outlet designed to provide a secure and leak-proof connection through the wall of your poly rainwater tank. Featuring a 50mm female thread, this flanged fitting serves as a sturdy connection point, making it straightforward to attach poly ball valves or pipework to your water storage system.
Sturdy Construction & Material
Built for long-term performance, this 32/25mm Poly Flanged Outlet is made from high-grade, impact-resistant polypropylene. The lightweight yet durable design ensures the fitting is easy to handle during installation while remaining strong enough to handle consistent use. The black body of the fitting provides natural UV resistance, helping it withstand the elements in outdoor environments without corroding or degrading over time.
Reliable Sealing & Performance
To ensure a watertight seal, this Poly Outlet utilises premium sealing components, including EPDM O-rings and Teflon seats. These high-grade materials allow for smooth operation and dependable sealing, giving you peace of mind that your setup is secure. Additionally, every unit is air-pressure tested under water by the manufacturer to confirm leak-free performance and field-proven reliability before it reaches you.
Versatile Applications
The corrosion-free poly material is designed for consistent performance in a variety of settings. While perfect for standard rainwater harvesting, these fittings are also suitable for a versatile range of liquids used in both agricultural and industrial applications. Whether it’s for the garden or out in the paddock, the 32/25mm Poly Outlet is built to remain reliable in rugged conditions.
Installation & Plumbing Compatibility
This fitting has been designed with modern plumbing in mind. The 50mm thread alignment matches the most common downstream poly pipework used by installers today. This ensures that connecting to your existing plumbing or new pipework is a seamless and efficient process. For long-term maintenance, repair kits are also available should you ever need to refresh specific components.
25MM FLEXIBLE HOSE KIT 25mm Flexible Hose Kit FROM TANK TO PUMP
In stock
$77.0025mm flexible hose kit is designed to provide flex between the tank and any fittings that the tank is connected to. If there is no flex hose kit used, then there is a risk of tank or pipe damage as a result of the tank or the pipework moving. If a poly water tank does not use a flexible hose connection, then the tank warranty will be voided.
The flexible hose kits are easy to install and also provide additional flexibility when it comes to the locating the pump or other pipe work near the tank.
water filters 10” X 45” 0.5 carbon block lead & heavy metals reduction replacement filter
In stock
$78.00QUICK OVER VIEW
- Effectively Reduces Chlorine, Tastes & Odours
- Lead & Heavy Metal Reduction Composite Carbon
- For Tank, Bore, or Mains Water Filtration
- 0.5 Micron Nominal Micron Rating
- Over 95% Reduction of VOC’s as tested by WQA
- Compliant to NSF/ANSI 42
WATER FILTERS 10” X 4.5 ”5M Coconut carbon block filter , chlorine , taste , odour , carbon block
In stock
$79.00
WATER FILTERS 10” X 4.5 ”5M Coconut carbon block filter , chlorine , taste , odour , carbon block
Quick Overview
- Made from 100% Coconut Carbon
- High Iodine 1200 for Increased Chemical Reduction
- Effectively Reduces Chlorine, Tastes & Odours
- 5 Micron Rating
- Over 95% Reduction of VOC’s
- Compliant to NSF/ANSI 42
Description
Pure Coconut Carbon Block Filters are made from a combination of high-performance coconut shell carbon, unique binders and industry leading manufacturing processes to deliver trade quality carbon block filters. They deliver exceptionally low pressure drop while maintaining a high dirt holding capacity with excellent contaminant reduction capabilities.
Pure Carbon Blocks are registered in compliance with NSF/ANSI 42, 53 and 61 for several things, including VOC’s, THM’s, Lead & Heavy Metal Reduction, Chloramine Reduction & Chlorine Taste & Odour reduction. This also includes meeting standards of purity & safety of the materials used.
The perfect carbon block filter is made from 100% Coconut Shell Carbon, which creates what many believe to be sweetest tasting water. The unique pore structure of this carbon is well suited for chemical absorption, including VOC’s, while reducing chlorine and chemicals that contribute to taste and odour
5 micron replacement – 1045CCB5Mic,
price $ 78.00 ea
2.5m Rain Harvesting Mechanical Water Tank Sight Gauge / level indicator (suited for most rainwater tanks)
In stock
$80.00The Rain Harvesting mechanical tank gauge is a water tank level indicator which allows you to tell the level of water at a glance.
Features and Benefits
- Quick and easy to install – It is a simple DIY product
- Seals directly into the tank
- Suitable for most existing and new tanks
- Non electrical so no connections or batteries needed
- Simple to read dial with ‘Empty’ and ‘Full’ tank indicators
- Requires a simple 32mm hole saw
- Low maintenance requirements
- UV resistant
- Suitable for all vented tanks up to 2.5 metres in height
- Can be installed on a wide variety of tank shapes
- Uses a simple and reliable float system
Note – Before installing your Tank Gauge it is important to calibrate it first. To do this you set the tank to Empty and Full positions and this will quickly see your tanks water level.
water filter 10” X 4.5” 0.5 Silver impregnated carbon block ( Bacteriostatic) replacement filter
In stock
$80.00QUICK OVER VIEW
1045S0.5-Silver Impregnated 0.5 Micron 10″ x 4.5″ Carbon Block Filter. Suits 10″ X 4.5” housings great for (TANK WATER)
- great for rainwater / tank water
- Made from 100% Silver Impregnated Coconut Carbon
- Bacteriostatic which makes it ideal for tank water
- Very Effective at Reducing Chlorine, Bad Tastes & Odours
- Rated at 0.5Micron
- Over 95% Reduction of VOC’s Silver impregnation helps reduce( Bacteriostatic) bacteria growth in the filter.
